Re: ACT_UPG phase

I would like to change the  data in ulimit but I donot know how can I do that. there is nobody here to help me with this.

Thanks

I had tried this command again:

sapux1:r3uadm 36>
sapux1:r3uadm 36> memlimits -v off
SAP R/3 address space configuration test tool V3.2 (98/01/14)
=========================================================================

Verbose mode off

Check the maximum data size per process (malloc)
Check the available swap space (malloc in several processes)
Process 18185 all ... Size = 2048MB   Total: 2048MB
Upper size limit 4096 reached. Finish checking

Total available swap space = 4096MB

Check the maximum size of mapped file (mmap anonymous,dev/zero)
Check protection operations on this area (protect)

Upper size limit 4096 reached. Finish checking

Maximum mapped file size: 4096MB
Maximum mprotect size:    4096MB

Check the maximum address space per process usable
both by process local memory and mapped file

Maximum address space ( mmap(4096 MB)+ malloc(1636MB) ): 5732MB

+-------------------------------------------------------+
|                        Result                         |
+-------------------------------------------------------+
Maximum heap size per process........:  2048 MB
Maximum mapped file size (mmap)......:  4096 MB
    measurement limited to 4096 MB
Maximum protectable size (mprotect)..:  4096 MB
    measurement limited to 4096 MB
    em/initial_size_MB > 4096 MB will not work
Maximum address space per process....:  5732 MB
Total available swap space...........:  4096 MB
    measurement limited to 4096 MB
    main memory size x 3 recommended , minimum 1 GB
sapux1:r3uadm 37>